Car Amplifiers

Crown Audio CTs-600 CTs Series 2-Channel 300 Watt per Channel Amplifier - Power Cable - Owner's Manual - Crown Audio 3 Years Warranty.The Crown Audio CTs-600 is a 2-Channel power amplifier housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters and an advanced level of well designed overload protection circuitry.

The "new for 2012" DISRUPT Line has arrived. Sleek, low profile, and slim in design, this new series is loaded with power. The Disrupt Series is guaranteed to deliver dependable, high-efficiency Class-D power to any mobile audio system. The DST4000D, DST3000D, and DST2500D digital amplifiers utilize full-range circuitry that maximizes amplifier efficiency while providing the highest quality of sound reproduction. Compact and powerful... everything that today's enthusiast wants!

Crossover: Sub: 50-250Hz; Lo/Hi: 250-6000Hz Frequency Response: 20Hz-25kHz �1dB Low Cut Filters: 30Hz / -3dB, 12dB/Octave Crossover: Sub: 50-250Hz; Lo/Hi: 250-6000Hz Inputs: Balanced XLR, 1/4 Outputs: Balanced XLR, 1/4 Total Harmonic Distortion: 0.05% Signal to noise ratio: 95dB Impedance: Input - 100 Kohms, Output - 220 ohms Dimensions: 19"w x 1.75"h x 5.75"d (483 x 45 x 146mm) Weight: 5.5 lbs (2.5 kg) 110-220V Switchable

75W x 4 + 200W x 1at 4 Ohms 250 watts RMS x 2 bridged at 4 ohms + 500 watts RMS at 2 ohms,variable high- and low-pass filters,bass boost, subsonic filter, and phase switch for subs

The JBL; 2-channel amplifier is crafted with fully-marinized circuit boards to keep salt and corrosion away from the critical circuit path. The on-board 12dB electronic crossovers provide tuning options for systems of any size, and the variable bass-boost circuit provides additional bass tuning to optimize performance, regardless of location.

Roswell Wake Air 500.4 Amp Rma Amplifier . This RMA marine amplifier uses a Full Range Class G/H topography that significantly improves efficiency while enhancing sound quality. Formulated coating to protect your investment. Class G/H amplifiers make more power for their size than traditional designs and offer much lower THD and higher damping factors than Full Range Class D amplifiers. Features High efficiency Class G/H Internal fan Reversed heat sinks to dissipate heat Fully marinized with water repellant and anti corrosion spray on circuit board Expandable for multiple units Multi application Crossover Controls Advanced Diagnostic System Small installation foot print Specifications POWER OUTPUT 4? - 75 Watts X 4 14.4V POWER OUTPUT 4? - 125 Watts X 4 14.4V TOTAL HARMONIC DISTORTION -... Less

150W x 4 at 4 Ohms Car Amplifier full-range Class-D amplifier design,500 watts RMS x 2 bridged at 4 ohms,variable high- and low-pass filters

Features:-2 x 150W RMS at 4 OHMS-2 x 240W RMS at 2 OHMS-1 x 380W MAX at 2 OHMS BRIDGED- Frequency Response: 10Hz-35kHz-Input Sensitivity (High Level): 50Hz-500Hz-Input Sensitivity (Low Level): 50Hz-150Hz-Signal- to-Noise Ratio: >90dB-THD at 1Watt, 4Ohm: Electronic Crossover Network-Bass Boost Circuit-Tri-Mode Capable-Nickel Plated RCA Inputs-Low Pass Filter Controls-High Pass Filter Controls- Subwoofer Remote Level Control-Heavy Duty Power Coated Heat sink-Power and Protection LED Indicators-Soft Turn-on/Turn-off-R emote Bass Control -Dimensions: 9.40'' (W) x 2.32'' (H) x 14.28'' (L)

Bass Restoration Processor-grey gray processor with wired dash-mount bass remote,increases bass response from your system,2-channel preamp inputs and outputs

Bass Restoration Processor-white white processor with wired dash-mount bass remote,increases bass response from your system,2-channel preamp inputs and outputs

50W x 4 Car Amplifier 150 watts RMS x 2 at 4 ohms bridged,variable high- and low-pass filters on front and rear channels,speaker-l evel and preamp inputs

PLANET AUDIO PLANET MOSFET 2CH POWER AMP 1200Wx2 MAX

General Features:2-channel Impact Series Car AmplifierPower Rating:4 Ohms: 350 Watts X 2 Chan.2 Ohms: 800 Watts X 2 Chan.Bridged, 4 Ohms: 1600 Watts X 1 Chan.Max Power Output: 1600 Watts X 1 Chan.Pulse Width Modulated Mosfet Power SupplyLed Power (green) And Protect (red) IndicatorsVariabl e Bass Boost (0 To +12 Db Bass Boost At 50 Hz)Soft Start Turn-on2 Or Mono Channel OperationSpeaker- level (high-level) Inputs With Signal Sensing For Automatic Turn-on3-way Protection Circuitry (thermal, Overload, And Speaker Short Protection)Heavy Duty Aluminum Alloy Heat-sink For Extreme Heat DissipationNickel -plated Rca Level InputsNickel- plated Screw TerminalsFrequenc y Response: 20-20000 Hz4 Gauge Power And Ground Wiring Is Required For Installation. Contact Us For Information Regarding A... Less

75W x 4 Car Amplifier 240 watts RMS x 2 at 4 ohms bridged,variable high- and low-pass filters,preamp inputs and outputs

100W x 2 Car Amplifier 300 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode),preamp and speaker-level inputs, dimensions: 6-3/4"W x 1-9/16"H x 4-1/4"D