This kit requires basic electronics knowledge, use of a multimeter, a quality soldering iron and miscellaneous tools such as flush cuts, sae allen wrenches and so forth. No need to use a multimeter anymore when rolling tubes! Access from the side of the amp, no removal of top cover! - Easy access to bias trimmers. You can use a jewelers screwdriver to dial in the bias through the top cover, no need to remove the cover to set! - Access to the 6/12V jumper through the top cover, no need to remove the top! - Output impedance selection can now be set from each side of the chassis! - Line output for pre-amp use - Revised protection circuit protects your headphones and audio gear! - Revised circuitry overall While Project Sunrise shares some cost saving measures as other designs such as an open... Less

TASCAM's MH-8 is the ultimate headphone amplifier for studio, stage and installation. Each of the eight stereo outputs gets 250mW per side with three switchable sources available. Two stereo inputs can be shared to any of the outputs, and individual stereo direct inputs are available for each of the eight channels. A headphone out can select any one of these inputs, or mix several together. A set of foldback outputs allow you to chain other MH-8s into a system.

THIS LISTING IS FOR AN ASSEMBLED AND TESTED PROJECT SUNRISE WITH RUSSIAN 6N23P TUBE/VALVE, 24V POWER SUPPLY AND HARD CASE!This kit requires basic electronics knowledge, use of a multimeter, a quality soldering iron and miscellaneous tools such as flush cuts, sae allen wrenches and so forth. Please contact prior to purchase if you have any detailed questions on the the kit version of this amplifier. A fully assembled and tested version of this amp is also available in our listings!Thank you for

THIS LISTING IS FOR AN ASSEMBLED AND TESTED PROJECT SUNRISE WITH RUSSIAN 6N23P TUBE/VALVE PLUS 24V POWER SUPPLY!This kit requires basic electronics knowledge, use of a multimeter, a quality soldering iron and miscellaneous tools such as flush cuts, sae allen wrenches and so forth. Please contact prior to purchase if you have any detailed questions on the the kit version of this amplifier. A fully assembled and tested version of this amp is also available in our listings!Thank you for checking o

THIS LISTING IS FOR AN ASSEMBLED AND TESTED PROJECT SUNRISE WITH RUSSIAN 6N23P TUBE/VALVE, 24V POWER SUPPLY AND HARD CASE! This kit requires basic electronics knowledge, use of a multimeter, a quality soldering iron and miscellaneous tools such as flush cuts, sae allen wrenches and so forth. Project Sunrise Version II was designed by headphone enthusiasts Jeremy H (based in the USA) and Frans G (Based in the Netherlands). No need to use a multimeter anymore when rolling tubes! Access from the side of the amp, no removal of top cover - Easy access to bias trimmers. You can use a jewelers screwdriver to dial in the bias through the top cover, no need to remove the cover to set - Access to the 6/12V jumper through the top cover, no need to remove the top - Output impedance selection can now... Less

Shipping Payments Return policy About us Popular Categories See More Categories Hold mouse over image to enlarge 4-Channel Headphone Amplifier - Kit MFG Part#: PHA80 SKU: 1210131 Condition: New Item description Pyle Pro Audio PHA80 4-Channel Headphone Amplifier Useful links Add to Favorite Sellers Ask seller a question Sign up to Newsletter Visit seller's eBay Shop Condition Tech specs Ship/Pay Policy Return Policy About Us / Feedback Kit Contains the following 2 items. Pyle Audio - 4-Channel H

The ART HeadAmp 4 headphone amp and headphone package will be music to your ears. It includes the HeadAmp 4 Stereo Headphone Amp and 4 pairs of G40DX Headphones. An amazing package, an incredible value, offered at a steal of a price.HeadAmp 4 Stereo Headphone AmpMost home recordings involve from one to four people, any or all of whom are going to need headphone monitoring. The monitor amp would be connected to the tape deck's headphone output or a mixer output so that the performers can hear themselves and each other. Of course, the same application can apply to band rehearsals and even home entertainment. HeadAMP provides amplification and individual volume control for up to 4 headsets. It can be driven by either line-level or headphone amplifier signals (mono or stereo).G40DX... Less

Replacing the venerable m902, the Grace Designs m903 is a stereo reference headphone amplifier and monitoring controller housed in a sleek 1U half-rack enclosure. The m903 is designed to provide audio pros with an exceptional headphone amp along with stereo mains monitoring, whether from an analog or digital stereo source. The m903 accommodates these different sources with rear panel XLR and RCA jacks, and both +4dBu and -10dBV sources are easily managed. A pair of stereo TRS outputs allow two pairs of headphones to be driven by the m903. AES3, S/PDIF, and optical digital sources are accepted via rear-panel XLR, RCA and TOSLINK connectors respectively. Plus, there's a USB port allows you to pump your favorite pleasure- listening tunes through the m903 for a true audiophile listening... Less

The Rockman® Ace line lets you hear your instrument's dynamic range and clarity to inspire you to 'pick up your guitar and play'. These high-quality, low-priced headphone amps offer built in compression, volume control and auxiliary stereo input/output. You can even route the output to a mixer for recording! The Guitar Ace offers both semi and heavy distortions. The classic Rockman tone with two different overdrive levels.

Tascam's MH-8 is the ultimate headphone amplifier for studio, stage and installation. Each of the eight stereo outputs gets 250mW per side with three switchable sources available. Two stereo inputs can be shared to any of the outputs, and individual stereo direct inputs are available for each of the eight channels. A headphone out can select any one of these inputs, or mix several together. A set of foldback outputs allow you to chain other Tascam MH-8s into a system.

Delivering 100 watts of bass power, the Tyrant 100B bass amplifier has everything you need to power up your clean bass tones. The 100B features a 4-band EQ to accentuate deep lows and bring out mids. It also features passive and active inputs, as well as RCA inputs and a headphone jack for practicing along to your favorite bands. The tilt back cabinet is excellent for stage and personal monitoring. The XLR line out with level control lets you easily connect to PA sound system or mixer. This is a versatile amp that’s perfect for the burgeoning bass performer.

THIS LISTING IS FOR AN ASSEMBLED AND TESTED PROJECT SUNRISE WITH RUSSIAN 6N23P TUBE/VALVE PLUS 24V POWER SUPPLY! This kit requires basic electronics knowledge, use of a multimeter, a quality soldering iron and miscellaneous tools such as flush cuts, sae allen wrenches and so forth. Project Sunrise Version II was designed by headphone enthusiasts Jeremy H (based in the USA) and Frans G (Based in the Netherlands). Our goal was to produce a highly tweak-able hybrid tube headphone amplifier that excelled not only musically, but in aspects other manufacturers just do not offer. Project Sunrise will let you roll a LARGE selection of 6 & 12V tubes and will power them properly with a dedicated heater power supply. Some other features like selectable output impedance, ability to take the input... Less

This headphone amp allows you to rock anywhere and not disturb anyone. Also with the Aux In jack, you can add any songs while playing your guitar.

folding, around-the-ear design with closed, padded earcups and adjustable headband,in-line microphone/remote for use with iPod, iPhone, and iPad,built-in headphone amplifier for more powerful and precise sound with portable music sources