Amplifiers and Preamps

Digital Craze.com

New cosmetics New Push on/off power switch 150 watts per channel 8 ohms 250 watts 4 ohms 400 watts bridged 8 ohms New SST 2 output devices Increased power supply capacitance - 30 000 MFD per channel Selectable Balanced or Unbalanced inputs Lower noise and distortion Two New Independent ultra-low-noise power transformers New computer modeled heat-sink design Quick connect remote 12 volt trigger Selectable gain - 1 Volt or 2 Volt Available in Silver or black finish with 19 or 17 inch faceplate

225 watts X 2 channels at 8Ω (20Hz to 20 kHz) at .09% Total Harmonic Distortion Class A Pre-Driver circuitry improves low-level detail for a smoother and more musical sound. Class AB Mosfet Output stage delivers efficient linear power. Balanced Inputs deliver the quietest and most accurate signal path between your preamp and amplifier. Differential input stage with a current source load assures DC stability and wide bandwidth linearity. Use of 1% Metal Film Resistors in the entire active circuitry to reduce noise for greater purity of sound. Use of Toroidal Transformers and Computer Grade Capacitors to provide high current for superior dynamics and extended low frequency control. Capability to operate at full power with a square wave input signal. Individual External Fuse Protection... Less

1X140 WATTS AT 8 OHMS 200 AT 4 OHMS.

The new Bryston 875 HT amplifier represents a state-of-the-art approach to the expanding home theater marketplace. Providing all the features and flexibility necessary to assemble a superb Home Theater Multi-Channel Surround System. The world famous all new SST technology is implemented throughout the 875 HT amplifier providing the sound quality and incredible flexibility Bryston is famous for. The amplifier offers 8 channels of amplification which can be utilized as independent 75 watt modules or any 2 adjacent channels bridged to 250 watts. FLEXIBLE OPTIONS WOULD INCLUDE: 7.1 surround system incorporating 7 channels at 75 watts and 1 subwoofer channel at 75 watts 6.1 surround system incorporating 6 channels at 75 watts and one subwoofer channel at 250 watts 5.1 surround system... Less

The challenge: to design an integrated audio amplifier with none of the compromises usually associated with this approach. Our design team has surpassed the challenge. The B-60 provides 60 watts per channel at 8 ohms and 100 watts per channel at 4 ohms. There are provisions for four high level inputs (CD Tuner Video and Aux) in addition to one tape loop and a pre-out/main-in feature. A headphone jack is provided for those requiring monitoring and private listening provisions. An optional motor driven volume remote control is also available. This motorized volume approach ensures the lowest possible distortion of the audio signal. Options Include: Bryston Internal DAC Bryston Internal MM Phono Stage Bryston handheld remote volume control 4 stereo RCA inputs 1 stereo RCA output 1 stereo... Less

An integration of a multi-room stereo audio distribution Bus with twelve compact and efficient 60W power amplifiers. Level Control - Local individual level control of each amplifier channel. May also be used to equally attenuate the level for both amplifier pairs. Dip Switch Configuration - Used to configure the On / Standby / Sense state of the unit the Bus audio and trigger distribution and Mono / Stereo configuration of the audio pairs. Bus Control and Muting - Allowing for single switching of the amplifier audio sense on/off feature and audio signal on any pair of amplifier channels with the Bus Switch enabled. Mono Usage - Ability to have up to twelve output channels that may be in mono. 12 Channel Amp. Here is one compact solution to your home theater amplifier needs. Providing a... Less

New cosmetics New Push on/off power switch 300 watts per channel 8 ohms 500 watts 4 ohms 900 watts bridged 8 ohms New SST 2 output devices Increased power supply capacitance - 30 000 MFD per channel Selectable Balanced or Unbalanced inputs Lower noise and distortion Two New Independent ultra-low-noise power transformers New computer modeled heat-sink design Quick connect remote 12 volt trigger Selectable gain - 1 Volt or 2 Volt Available in Silver or black finish with 19 or 17 inch faceplate3

New cosmetics New Push on/off power switch 300 watts per channel 8 ohms 500 watts 4 ohms New SST 2 output devices Increased power supply capacitance - 30 000 MFD per channel Selectable Balanced or Unbalanced inputs Lower noise and distortion Three New Independent ultra-low-noise power transformers New computer modeled heat-sink design Quick connect remote 12 volt trigger Selectable gain - 1 Volt or 2 Volt Available in Silver or black finish with 19 or 17 inch faceplate

The SubContractor Series is a complete line of powerful easy-to-install subwoofers designed to meet any custom installation need whether it?s in-room in-wall in-floor or in-ceiling. At the heart of the SC Series is the 1250 watt SC-1250 rack-mountable amplifier with a built-in 7-band automatic room-EQ. The SC-1250 uses Velodyne?s patented Energy Recovery System (ERS) Class D switching amplifier. With 3000 watts dynamic power it sports more than enough headroom to reproduce the impact and excitement of the most dramatic special effects and the lowest musical frequencies with detail and definition. Need even more bass? No problem. The SC-1250 can control up to two SC Series subs. Incredibly easy to install and configure 1250 watt RMS (3 000 watt peak) amplifier power Reliable Class D Energy... Less

An integration of a multi-room stereo audio distribution Bus with twelve compact and efficient 30W power amplifiers. Level Control - Local individual level control of each amplifier channel. May also be used to equally attenuate the level for both amplifier pairs. Dip Switch Configuration - Used to configure the On / Standby / Sense state of the unit the Bus audio and trigger distribution and Mono / Stereo configuration of the audio pairs. Bus Control and Muting - Allowing for single switching of the amplifier audio sense on/off feature and audio signal on any pair of amplifier channels with the Bus Switch enabled. Mono Usage - Ability to have up to twelve output channels that may be in mono. 12 Channels. 30 watts Power Rating: 8 ohms Power Rating: 55 watts @ 4 ohms. Current (Peak to... Less

New cosmetics New Push on/off power switch 140 watts per channel 8 ohms 200 watts 4 ohms Available in 3 4 and 5 Channel New SST 2 output devices Increased power supply capacitance - 30 000 MFD per channel Selectable Balanced or Unbalanced inputs Lower noise and distortion Two New Independent ultra-low-noise power transformers New computer modeled heat-sink design Quick connect remote 12 volt trigger Selectable gain - 1 Volt or 2 Volt Available in Silver or black finish with 19 or 17 inch faceplate