Security Systems and Surveillance

Combo Smoke / CO Detectors

This is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to eight times the normal pulse rate. After the photodiode confirms the presence of smoke for two consecutive pulses, it will produce the signal necessary to trip the audible and strobe light alarms.

The TX-6310-01-1 wireless carbon monoxide (CO) alarm monitors the levels of CO gas and gives early warning when potentially dangerous levels exist. It does not detect fire, smoke, or any other gas. If a dangerous concentration of CO is detected by patented and field-proven electrochemical sensor, an LED indicator illuminates and an internal siren is activated in temporal 4 pattern. The CO alarm also transmits an alarm signal to the control panel within 15 seconds of detecting dangerous concentration of CO gas. The control panel activates its internal siren and reports the alarm condition to the central monitoring station (if the system is monitored). The CO alarm also detects low battery, wall tamper, and sensor end-of-life. These trouble codes are transmitted to the control panel. The... Less

The FE-2000 is a 4-wire, 12/24 VDC projected beam type smoke detector designed to be used with a listed 4-wire control panel. Listed to U.L. 268, the FE-2000 consists of a transmitter, receiver and control box. The detector operates between a range of 33ft. to 330 ft. (10m to 100m).

Fail Safe Operation Battery Operated Automatic Release when Battery Power Drops Easy to Install Self-contained Adjustable Hold-Open Stand-Alone Detector/Holder SENSAGUARD will hold the door open at a single, adjustable position: ???Pull Side Mounted adjustable from 90?? to 130?? ???Push Side Mounted adjustable from 90?? to 180?? Adjustable Hold-Open force Unit is furnished with battery. To replace battery, use a 9V Alkaline Eveready Energizer ?? #522 battery or Duracell?? #MN1604. Do not substitute. Finishes: US28 Clear Anodized Aluminum and 313AN Dark Bronze Anodized Aluminum

Smoke Detector Test Equpiment, Provides Open Delivery Testing, For Use With Residential Or Commercial Detectors, Includes Aerosol Extension Tools, Manufacturers Warranty Length 100 Percent Lifetime

The MS Series remote accessories are designed to be used with the Air Products and Controls Duct Smoke Detectors to provide audible and visual indication as well as remote test/reset functions. These devices are constructed of attractive, yet durable brushed stainless steel and mount on a standard single or double gang electrcal backbox. Features -Pilot LED (green) -Alarm LED (red) -Key Operated Test/Reset -Single gang

The SK-Duct Intelligent Non-Relay air duct smoke detector is used with SKPhoto (included) for detecting smoke and products of combustion present in air moving through an HVAC air handling system.

ITEM DESCRIPTION: DET-TRONICS / DETRONICS PYROTECTOR 30-3003 EXPLOSION PROOF FLAME DETECTOR. EXCESS SPARES STOCK (HINT: CHANGE ORDER NEVER APPROVED!). PHOTO IS ACTUAL ITEM. CHECK OUR FEEDBACK FOR YOUR ASSURANCE OF SATISFACTION AND HIGH QUALITY FIRE ALARM ITEMS! PRODUCT CUTSHEET: http://www.kele. com/Catalog/09% 20Hazardous% 20Locations/PDFs/ 3003%20Instruction % 20Manual.pdf http://www.notifie r. com/products/data sheets/DN_3846.pdf You have to check this out! http://www.ebay. com/itm/Explosion -proof-smo

The MS Series remote accessories are designed to be used with the Air Products and Controls Duct Smoke Detectors to provide audible and visual indication as well as remote test/reset functions. These devices are constructed of attractive, yet durable brushed stainless steel and mount on a standard single or double gang electrcal backbox. Features -Pilot LED (green) -Alarm LED (red) -Fault/Trouble LED (yellow) -Key Operated Test/Reset -Horn -Double gang

The FE-5000 is a U.L. 286-listed projected beam smoke detector that consists of up to four integrated transmitter, receiver detector heads and single low level remote control unit. The detector operates between a range of 26.25 ft. to 330 ft.

The FSA-410 (four- wire) photoelectric smoke detectors incorporate a low-profile design and features that help reduce false alarms and provide consistent smoke detection. Both smoke detectors offer a built-in alarm horn, integral dualsensor heat detection, automatic drift compensation and an easy-maintenance removable chamber. The FSA-210/410 are listed for commercial and residential applications, and are compatible with all DSC control panels. Precise and quick sensitivity testing is easily accomplished with the new FSD-100 handheld test meter.

SafeAwake Fire Alarm SAFEAWAKESleep peacefully while feeling confident that you will wake up when your T3 smoke detector is activated. The SafeAwake Fire Alarm provides essential protection for deaf and hard of hearing people, or those who might not wake up to the standard audible alert of an ordinary smoke detector. Once your T3 smoke detector is activated, the SafeAwake alerts you with bed shaker, a flashing white light and a high decibel, low frequency (500Hz) alarm. This 500Hz tone has been proven to be significantly more effective at waking those with mild to severe hearing loss when compared to the standard domestic and commercial smoke alarm audible signal which currently produces a 3000Hz signal.Two year warranty. UniversalityThe SafeAwake responds to any US domestic or commercial... Less

The MS Series remote accessories are designed to be used with the Air Products and Controls Duct Smoke Detectors to provide audible and visual indication as well as remote test/reset functions. These devices are constructed of attractive, yet durable brushed stainless steel and mount on a standard single or double gang electrcal backbox. Features -Pilot LED (green) -Alarm LED (red) -Horn -Single gang

Automatic drift compensation * High/Low sensitivity trouble * Easy-maintenance replaceable chamber * Magnet activated test * Unique, non-contact sensitivity reading with hand-held FSD-100 test meter * Built-in, fixed- temperature heat sensor option with an alarm threshold of 13deg.F (57.2deg.C) * UL268 Listed for commercial and residential applications

DESCRIPTION: VESDA (FIKE LABELED) VLP-002 (VESDA LASER PLUS) ASPIRATION BASED SMOKE DETECTION LASER UNIT. FREE SHIPPING (UPS GROUND). CHECK OUR FEEDBACK FOR YOUR ASSURANCE OF SATISFACTION! Laser based smoke detection 4 configurable alarm levels Four inlet pipes Airflow supervisor per sampling pipe Dual stage air filter Replaceable air filter 7 programmable relays VESDAnet AutoLearn PRODUCT CUTSHEET: http://www.firesen se.com.au/vesda- laserplus-vlp-002. html EBAY PRICE COMPARISON: $1564 + $1