Security Systems and Surveillance

Smoke Detectors

This is a photoelectric single station smoke detector designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. It has a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. When smoke enters the chamber, the infrared beam is deflected onto the sensor. The LED rate increases to eight times the normal pulse rate. After the photodiode confirms the presence of smoke for two consecutive pulses, it will produce the signal necessary to trip the audible and strobe light alarms.

PHOTOELECTRIC SMOKE ALARM W/ BATT.BACKUP SOUNDER 120VAC

Duct Smoke Detector, Photoelectric, Finish Clear Plastic, Surface Mounting, Alarm Current 35 Ma, Standby Current 25 Ua, Depth 1 7/8 In, Height 5 7/16 In, Length 14 1/2 In, Ambient Temp Limits -20 To 158 F, Air Velocity 100 To 4000 Fpm, Humidity Range 20 To 95 % Rh, Standby State 25 Ma, Voltage 20 To 31 Vdc, 24v Dc, 24v Ac, 120v Ac, 220/240v Ac

Honeywell's 5898 Wireless K-Band DUAL TEC Motion Sensor provides superior detection and reduces the risk of false alarms. The combination of PIR and K-Band microwave technologies enable the sensors to distinguish between real intruders and other environmental conditions by "confirming" each other within a defined area of protection. The sleek, compact design makes it ideal for applications where aesthetics and discretion are critical. PIR sensitivity and temperature sensing can be enabled via local programming or from the central station. Installation is easy, with no jumpers, switches or disassembly, fewer mounting restrictions and an automatic walk test mode that turns on the LED for ten minutes - saving installers one trip up the ladder for each sensor. The 5898 blends perfectly with... Less

Riser-rated PVC: FPLR 18 gauge (AWG) sizes and 4 conductor, Solid copper conductor, Rated to 300 volts, 1000 Feet, RED. Applications: Fire Alarm, Smoke Detectors, Security Systems and other Fire Protective Circuits.

Fireboy Xintex Smoke Detector . Designed for the quick detection of slow burning smoldering fires. Unaffected by wind or atmospheric pressure. They are also excellent at the detection of fast-flaming fires. The LED is clear in a normal state and produces a red light in alarm state. Operation from 10V to 30V D. 4"dia. x 2"D.

Solo 330 is an aerosol dispenser used to test smoke detectors up to 4.5 inches in diameter.

Fail Safe Operation Battery Operated Automatic Release when Battery Power Drops Easy to Install Self-contained Adjustable Hold-Open Stand-Alone Detector/Holder SENSAGUARD will hold the door open at a single, adjustable position: ???Pull Side Mounted adjustable from 90?? to 130?? ???Push Side Mounted adjustable from 90?? to 180?? Adjustable Hold-Open force Unit is furnished with battery. To replace battery, use a 9V Alkaline Eveready Energizer ?? #522 battery or Duracell?? #MN1604. Do not substitute. Finishes: US28 Clear Anodized Aluminum and 313AN Dark Bronze Anodized Aluminum

EVERFOCUS 4 CH. 1 TB DVD 120 FPS AT CIF MOBILE DEVICE COMP SNAP SHOT SEARCH HIGHER FRAME RATE AT D1 DUAL STRM H.264 FREE DNS PTZ CONTROL LOCAL& NETWORK INDIVIDUAL FPS MOTION & RES. 2 USB PORTS GUI VGA

The RT-3000-P is a weathertight (NEMA 4X Rated), hi-temp, low flow photoelectric duct smoke detector, capable of operating at 230VAC, 115VAC, 24VAC or 24VDC.

Smoke Detector Test Equpiment, Provides Open Delivery Testing, For Use With Residential Or Commercial Detectors, Includes Aerosol Extension Tools, Manufacturers Warranty Length 100 Percent Lifetime

ITEM DESCRIPTION: DET-TRONICS / DETRONICS PYROTECTOR 30-3003 EXPLOSION PROOF FLAME DETECTOR. EXCESS SPARES STOCK (HINT: CHANGE ORDER NEVER APPROVED!). PHOTO IS ACTUAL ITEM. CHECK OUR FEEDBACK FOR YOUR ASSURANCE OF SATISFACTION AND HIGH QUALITY FIRE ALARM ITEMS! PRODUCT CUTSHEET: http://www.kele. com/Catalog/09% 20Hazardous% 20Locations/PDFs/ 3003%20Instruction % 20Manual.pdf http://www.notifie r. com/products/data sheets/DN_3846.pdf You have to check this out! http://www.ebay. com/itm/Explosion -proof-smo

The MS Series remote accessories are designed to be used with the Air Products and Controls Duct Smoke Detectors to provide audible and visual indication as well as remote test/reset functions. These devices are constructed of attractive, yet durable brushed stainless steel and mount on a standard single or double gang electrcal backbox. Features -Pilot LED (green) -Alarm LED (red) -Fault/Trouble LED (yellow) -Key Operated Test/Reset -Horn -Double gang