Marshall tone in a 5-watt combo? With the Class5, that's exactly what you get! This all-tube combo uses a streamlined feature set to give you a Bluesbreaker- style aesthetic with Plexi-style control setup. The preamp has a pair of ECC83 tubes for preamp distortion. The power section of the Class5 uses a single EL84, which gives you classic Class A vibe. This beauty is packed with the tone of a big stack, and is extremely responsive to adjustments to the guitar's volume and tone controls. Big sound, small package — Marshall's Class5.Marshall Class5 All-tube 1 x 10" Combo Amp at a Glance:Back to basicsSpecially designed speaker for premium toneBuilt in BritainBack to basicsCreated in the legendary "Bluesbreaker" style, the Class5 gets back to basics with a top-loaded Plexi-esque panel... Less

Hybrid amplifier featuring a twin-tube preamp and a 1000-watt digital power section Same great looks as the original Orange Tiny Terror Weighs just 11 lbs, super lightweight for its power and sound Portable, compact size Volume, bass, middle, treble, gain, active/passive switch Maintaining the size of the famed Orange Tiny Terror and weighing in around 11 lbs, the new Orange Terror Bass BT1000H is a 1000-watt hybrid amplifier with a Class D solid state power section and a twin-tube 12AX7 preamp to deliver high-powered performance that can crank out 1000 watts of pure legendary Orange tone. Super lightweight for its power and sound, the compact size of the new amp has the portability that allows traveling musicians to go anywhere without worrying about what backline waits at the venue.

The Hartke LH500 is a 500-watt bass amplifier head featuring a classic 12AX7 Class-A tube front-end with a solid-state output. Portable and roadworthy, the Hartke LH500 offers both treble and bass shelving, so you can give its warm tone the edge you want. You can also tweak the bright and limiter switches to shape your sound even further. Rackmount it for the ultimate in convenience, then plug in - there are a front-panel XLR balanced direct output a rear-panel 1/4" effects loop and 1/4" output connectors on the Hartke LH500.Hartke LH500 500-watt Bass Amplifier Head at a Glance:500 watts with a tube front-end design and tonal shapingRugged metal, rackmountable chassis, so it's road ready500 watts with a tube front-end design and tonal shapingThe LH500 features a classic 12AX7 Class-A tube... Less

The Fender TBP-1 delivers amazing tube bass tone with adjustable tube overdrive that brings your bass forward in the mix. Its passive tone stack produces warmth and thickness that creates a more defined bass presence.

The TBP-1 delivers amazing tube bass tone with adjustable tube overdrive that brings your bass forward in the mix. Its passive tone stack produces warmth and thickness that creates a more defined bass presence. Other features include Vari-Q smart semi-parametric EQ, room balance control to compensate for extreme acoustics, XLR output with a Jensen® line-out transformer optimal for recording or live performance, tuner send with mute, effects loop with level control that can double as a solo boost, bi-amp low and high sends with active crossover, and full range main output. Four button footswitch included. Model Name: TBP-1 Tube Bass Pre-Amp Series: Pro Series Bass Amps Amplifier Type: Tube Color / MSRP* / Part # : * Brushed Aluminum $1,099.99 Controls: Tube Preamp: Volume, Bass, Mid,... Less

The Markbass Classic 300 bass amp's heart beats with the power of JJ Electronics tubes--2 ECC83 preamp tubes, 2 ECC99 tubes, and 6 KT88 power tubes--which give you the warmth and fullness of the great old amps that are now aging or retired. A massive 300W of tube-driven power will handle just about any venue imaginable. But times have changed, and this bass head comes with a brain: an onboard microprocessor re-biases your tubes every time you start up the Markbass Classic amp. To top it off, the Classic 300 bass head puts out a loud 300 watts of power. 2 x16 LCD screen shows a digital VU meter and/or other technical parameters Bias Control for making power tubes work in HiFi mode/or Long Life mode Standby control for making amp work in low consumption mode when momentarily not in use 1/4"... Less

The CAD M9 is a cardioid single tube externally biased condenser microphone that features servo-valve technology. It's a natural bridge between the valve technology developed for CAD's VX2 microphone and the servo op-amp technology developed for their M-Series mics. The M9's head amp is a 12AX7 tube in a circuit optimized for super wide dynamic range and low noise. The output stage (balanced high speed dual op-amp) allows for long cables without affecting microphone performance. Suggested Applications Studio Vocals Voice-over Acoustic Instrument Guitar Cabinets Bass Cabinets Strings Piano Included Accessories 30 ft. professional quality 7 conductor cable with gold plated XLR male and female connectors MV200 Analog Power Supply Line Cord ... Less

The Traynor DynaBass 800H is set apart from other bass amp heads by its versatile hybrid tube and solid state preamp. The all-tube input signal path gives you as much grunge or as little tube warmth as you want. Meanwhile, the FET-driven solid state input circuit ensures highly responsive and clean tone. The DynaBass amp head's innovative blend control ensures the right mix of raw power and definition.Built for the most demanding stages, the DynaBass 800H is one of the highest-powered bass amps Traynor's ever offered. The highly efficient solid state amplifier section reliably delivers 800W to a 4-ohm load for maximum compatibility with a typical live rig.A dual fan cooling system integrated into the DynaBass 800H completely negates the need for heavier heatsinks. Well placed... Less

The Orange Terror Bass 1000 Watt Bass Tube Amp Head is a hybrid amplifier with a Class D solid state power section and the same preamp as the all-tube AD200B UK bass amp.The Terror Bass 1000 is louder and has more headroom than the 500 watt Bass Terror. With the same great looks as the other Terror series guitar amps, and a rugged construction that will stand up to the road, bass players can now become a part of the famed Tiny Terror club.Note: The Bass Terror does not require rebiasing when replacing tubes.

Bazooka Bass Tubes Bazooka Bass Tubes enclosures are optimized for corner loading. The Bass Tubes enclosure's port and woofer are on the same plane and in close proximity for maximum corner-loading results. And, just like a megaphone amplifies a cheerleader's voice, the corner of your car amplifies the concentrated bass output of the Bass Tubes enclosure. The Bass Tubes enclosure's advantage is it fits any vehicle--the perfect fit for a perfect sound. The BT8014 The 8014 is great behind the seats of full-size pickups, or in the trunks of sedans or coupes or hatchbacks. If you're a person who changes vehicles frequently, you'll appreciate being able to use this versatile piece in many cars for years to come. 150 watts gets this sub pumping, thanks to the super efficient Bass Tubes... Less